What Is ProJoint Titan and Why Should You Use It for Paving?

When choosing jointing compounds for paving, it’s easy to get overwhelmed by the options. For homeowners and landscapers looking for a high-performance solution, ProJoint Titan is one of the most reliable and time-saving products on the market. Whether you're working with porcelain, natural stone, or concrete slabs, using the right compound can make all the difference in durability, finish, and long-term maintenance.

We’ll explain what ProJoint Titan is, how it works, and why it’s becoming a go-to product for modern paving projects across the UK.

What Is ProJoint Titan?

Nexus' ProJoint Titan is a two-part epoxy resin jointing compound designed specifically for paving. It is manufactured by Nexus, a trusted name in paving systems. Titan is known for its high strength, rapid curing properties, and suitability for wet and cold weather conditions. It’s ideal for projects where a strong bond and fast set are essential.

Unlike traditional sand-and-cement pointing or air-drying resin solutions, Titan’s epoxy-based formula delivers a far more durable and weather-resistant joint. Once cured, the joints are fully hardened and resistant to pressure washing, frost, and chemical damage.

What Materials Can You Use ProJoint Titan With?

ProJoint Titan is suitable for a wide range of paving materials, including:

Porcelain tiles
Natural stone such as granite or sandstone
Concrete paving slabs
Clay pavers

Its flexibility and strength make it especially effective for high-traffic areas such as patios, driveways, courtyards, and commercial pathways.

Key Benefits of Using ProJoint Titan

1. Strong and Durable Finish

Once mixed and applied, Titan creates a rock-hard finish. This makes it ideal for driveways and heavy-use areas where traditional jointing might crack or wear away over time.

2. All-Weather Application

Unlike many jointing products, Titan can be applied in damp or cold conditions. This makes it practical for use in the UK, where dry weather is not always guaranteed.

3. Quick Setting Time

Titan sets fast – usually within hours – so you won’t need to worry about prolonged downtime. It’s ideal for projects that need to be completed quickly.

4. Easy to Use

Supplied in two components (resin and sand), Titan is mixed on-site and applied with a squeegee. The product self-compacts into joints and rinses off surfaces cleanly with water.

5. Resistant to Weeds and Algae

The fully hardened joint prevents weed growth and reduces the risk of algae forming, which helps keep the paving looking neat with less ongoing maintenance.

6. Long-Term Cost Savings

Though Titan is more expensive upfront than standard sand or cement-based jointing, the long-lasting results mean fewer repairs or replacements in the future.

How to Apply ProJoint Titan

Applying ProJoint Titan correctly is essential to get the full benefit. Here’s a simplified version of the process:

Prepare the area – Ensure your paving is clean and your joints are at least 20mm deep and 5mm wide.
Mix the compound – Combine the resin and hardener, then add the sand mix. Stir thoroughly until consistent.
Apply to surface – Pour onto the paving and spread with a squeegee, working the mix into the joints.
Rinse excess – Use water and a brush to clean off the paving surface. Be thorough to avoid residue marks.
Allow to cure – Leave the surface to dry. Most applications cure fully within 12–24 hours.

While DIY installation is possible, working with an experienced landscaper can help guarantee a clean finish and even jointing.

When Should You Use ProJoint Titan?

ProJoint Titan is especially suitable for:

Large paved areas where durability is key
Projects using porcelain or smooth slabs where grip is needed
Cold or damp climates where traditional compounds fail
Driveways or patios that require pressure washing

If your project is small, decorative, or unlikely to face heavy use, a standard jointing compound may suffice. But for long-term value and minimal maintenance, Titan is a strong investment.

Common Mistakes to Avoid

Even high-quality products can underperform if used incorrectly. Avoid these common issues:

Not cleaning paving thoroughly before application
Leaving residue on the slab surface
Applying in extremely hot weather (it sets too fast)
Mixing incorrectly or inconsistently

If you’re unsure about the application process, speak with a professional. At Macclandscapes, we install all types of paving and jointing products. If you'd like expert help, contact us here and we’ll be happy to provide a free quote.

Why Choose Macclandscapes for Your Paving Project?

We’re a local Macclesfield-based landscaping company with experience in all paving styles, including modern and traditional finishes. Whether you’re planning a porcelain patio, block-paved driveway, or natural stone pathway, we can advise on the best materials and install your paving to the highest standards. We offer landscaping services as projects, check out our Instagram and Facebook for some of our recent ones!

By using trusted products like ProJoint Titan, we make sure your paving looks great and lasts for years.

Final Thoughts

ProJoint Titan is a high-performance jointing solution designed for longevity, speed, and strength. It's suitable for a wide range of paving projects and can be applied in conditions that many traditional compounds can’t handle. While it costs more than basic alternatives, the benefits in durability and appearance make it a smart choice for any serious landscaping project.

If you’re considering paving work and want long-lasting results, we’re here to help. Contact us here for expert advice and a no-obligation quote.