EASYJoint Select

Azpects EasyJoint jointing compound is up to 20 times faster than standard jointing methods, suitable for application in all weather conditions all year round. The brush in jointing compound is easy to use and reduces strain on the knees and back. The perfect alternative to grout and suitable for DIY and professionals. No stains and mark-free when used correctly.

Application:

• Wet the paving: use a hose to saturate the area
• The paving must remain wet throughout
• Seal any sensitive paving before laying
• Work quickly with a team of two: one sweeping and the other using the hose
• Using small quantities of EasyJoint, simultaneously spread and wash the compound across the surface using a light jet of water and a broom/squeegee, allowing it to fall into the joints
• Top up: ensure all joints are even and top up any low areas
• Wash and clean: gently spray water across the surface to wash off any residue
• When the water has drained away, use "flicking" motion with a clean, soft hand brush to remove any loose grains
• Smooth the joints: when drained and dried, lightly "point" or "strike" the joints with a suitable finishing tool

For best results:

• Use on a free draining site
• Joints must be fully exposed to air to cure
• Ensure the project has a suitable "fall" to allow surface water to drain away

Solid colours and a smoother finish

• Easy to use and faster than traditional methods.
• Ready to use with no mixing required.
• Wet the paving, brush in the compound, then strike the joints for a smooth finish.
• Unused product can be kept for future use.
• For all joints of 3mm wide and over.
• Perfect for natural stone and porcelain.